Crystal Reef Aquatics

World class aquariums and filtration

Let our Master Builders with over 30 years of custom aquarium design and manufacturing make your dream come true. (Formally Oceans by Design)

The Triton Series 30 x 15 x 15 configuration Sump comes complete with all the accessories show below at no extra charge to our customers. These include 5 John Guest fittings and clear solid acrylic tubing for Triton Dosing, John Guest ftting and tube for ATO input,  Probe Holder,  All bulkhead and piping, Dual heater holders, Adjustable Overflow Control baffle, Algae Guard, Adjustable Skimmer/Refugium Baffle,  Adjustable Skimmer Baffle, Media rack and Wire Management Portals to give our clients a fully Plug and Play Sump. All Sump are made from top Grade Plexiglass , Designed and Hand built in the US.

 

1 = Dual 1 inch drain system. With all bulkheads and piping installed. 

2 = Two John Guest fittings with attached 6 inch 5/16 Acrylic tubing in Refugium for Nutrient Dosing

3 = CRA probe Holder, Designed for 3 normal probes and 1 larger (Temp) all being adjustable.

4 = 2 three inch x 1.5 Wire management portals. 

5 = 1 John Guest fitting with Tube for ATO input

6  = 3 more John Guest fittings with tubes for Cal/Alk/Mag dosing in the return section

7 = Adjustable Skimmer Baffle to allow you more precise control the water level in the skimmer chamber based on your exact Skimmer requirements. Ranges from 5 inches to 14.

8 = Clear removable Algae Guard to stop the migration of algae from the Refugium Chamber.

9 = Adjustable Overflow Baffle. This allow the user to control the flow of water entering the Refugium. The user can have a top of the water column passive flow, or a more aggressive lower flow or any combination of the two.

10 = Adjustable Refugium to Skimmer Chamber baffle. With this the user can control the height of the refugium water level independently from the skimmer chamber.

11 = Return Chamber 14.5 x 6

12 = Fully Removable Media Rack measuring 3 x 14.5 inches

13 = Skimmer Chamber measuring 9 x 14.5 inches

14 = Refugium Chamber measuring 11 x 14.5 and holding approximately 9 gallons

 

Displayed with Dual 4 inch Sock Tray

 
overflow baffle.jpg

Adjustable Overflow Baffle

An additional free accessory the Triton Adjustable Overflow Baffle. This allow the user to control the flow of water entering the Refugium. The user can have a top of the water column passive flow, or a more aggressive lower flow or any combination of the two.

 
algae guard.jpg

Algae Guard

Another Free Accessory that comes with your Triton sump is our Clear removable Algae Guard to stop the migration of algae from the Refugium Chamber

 
44 triton dosing system.jpg

Triton Dosing 

Our Triton Dosing system comes with John Guest 1/4 fittings with a matching removable 5/16 Hard acrylic tube Installed. Locations are separated to accommodate Nutrient dosing the in the Refugium, Element dosing in the Return section with higher flow and also ATO in the media rack Chamber. 

 
Probe holder v1.jpg

Probe Holder

The CRA Probe Holder is designed to hold 3 normal sized probes and 1 larger Temperature probe. The unit is fully adjustable to allow our customers to use any style or probe type.

 
Skim-refugium adj cover.jpg

Adjustable Refugium Baffle

Designed to give the user more control of the water height in the Refugium, with out affecting the Skimmer chamber.

 
wire management.jpg

Wire Management

The amount of Wire Management Portal Vary from model to model but the size stays consistant at 3 x 1.5 inches each. This allow the user not to have to over the bracing and keeps the wires close to the walls of the sump for neat and tight management.

 
44 media rack v1.jpg

Media Rack

The CRA media rack is the full length of the sump and allow our customers to use Media bags, Sponge or Bio-Blocks. The unit is full removable for ease of cleaning.